|
Electrical Measurement
Automation systems often have to control their environment which is done by analog and digita I/O cards and their drivers.
|
Analog I/O
| DAPs |
Data Acquisition Processors. I/O subsystems with PCI bus which have a processor onboard. |
| Ines |
16 bit measurement boards with Linux drivers for LabVIEW and C/C++. |
|
|
Digital I/O
| Sealevel Systems, Inc. |
Serial and digital interface cards for USB, PCI and ISA with Linux support. |
|
|
Network IO Systems
| mHPC |
The modular DIN-Rail PC by eac can be used to construct a controller on a DIN rail by the combination of a PC module with several i/o modules. Interfaces to several fieldbusses and a free-of-cost PLC software based on IEC-61131-3 are available. |
| MG-200 |
Gateway to connect I/O-Boards from EnFlex to a TCP/IP network. The gateway is linux based and has RS-232, RS-485 and Dallas Semi Microlan interfaces. |
| ICP-CON Modules |
Modular IO system, based on the RS-485 bus. You can operate up to 254 devices on one bus which is connected to the PC's RS232 port via an interface module. |
| SNAP |
Ethernet based IO subsystem. |
| Sixnet |
Linux based ethernet I/O systems for industrial environments. |
|
|
Drivers
| Comedi |
The Common Measurement Devices Interface. The driver standard for measurement hardware on Linux. |
|
|
Interfaces
| Linux-GPIB |
GPIB software project. |
| SPI Driver |
A driver for the SPI (synchronous serial) port. |
| Sealevel Systems, Inc. |
Serial and digital interface cards for USB, PCI and ISA with Linux support. |
| IN-LUX |
Use PCI interface chips on Linux. |
