USB-SD-Mux Manual¶
Version of this manual: usb-sd-mux-M01-R10-V01
Note
This manual is only valid for the following revisions of USB-SD-Mux:
usb-sd-mux-S01-R04-V02
To check if this handbook matches your revision of the USB-SD-Mux see Product Identification.
Important
Read this document carefully.
Table of Contents¶
Changes in this manual¶
- usb-sd-mux-M01-R11-V01¶
2024-03-25: Fixed multiple typos.
- usb-sd-mux-M01-R10-V01¶
2023-01-24: Fixed article number for product identification (was written as 00001, but the actual article number is 00002).
- usb-sd-mux-M01-R09-V01¶
2021-06-04: Reference correct standard in conformity declaration: conformity was tested using EN 55032:2012 and not EN 55022:2010.
- usb-sd-mux-M01-R08-V01¶
2021-04-28: Product Identification: Add section for a new product label on the bottom of the packaging.
- usb-sd-mux-M01-R07-V01¶
2021-04-06: Commissioning: Adapt to the new
usbsdmux
software that usesudev
instead of a service to access the device. Added UKCA declaration of conformity. Added product changelog.- usb-sd-mux-M01-R06-V01¶
2020-10-22: Troubleshooting: Add sections on missing permissions and strategies to mitigate problem when access to the micro SD card fails.
- usb-sd-mux-M01-R05-V01¶
2020-05-28: Clarify how to obtain the latest version of this manual.
- usb-sd-mux-M01-R04-V01¶
2020-03-27: Update system requirements to mention git and python3-venv. Use python3-venv instead of virtualenv in quickstart.
- usb-sd-mux-M01-R03-V01¶
2019-11-13: Updated chapter Product identification.
- usb-sd-mux-M01-R02-V01¶
2019-05-27: Updated the hardware identification of the device.
- usb-sd-mux-M01-R01-V01¶
2019-04-24: Initial Release